|
|
|
|
SKINTOP® ST standard
SKINTOP® constructed from polyamide with metric thread is easy-to-assemble. It is suitable for universal applications especially for manufacturing machinery and equipment, measuring and control instrument, automation, electrical engineering and robotics.
SKINTOP® STR - with reducing seal insert
This SKINTOP® STR is designed with reducing seal insert enabling cable with outer smaller diameter to be sealed.
|
.
PG size |
.
7
|
.
9
|
.
11
|
.
13.5
|
.
16
|
.
21
|
.
29
|
.
36
|
.
42
|
.
48
|
|
.
Clamping
range (mm) |
.
2.5-
6.5
|
.
3.5-
8.0
|
.
4.0-
10
|
.
6.0-
12
|
.
9.0-
14
|
.
13-
18
|
.
14-
25
|
.
24-
32
|
.
35-
38
|
.
39-
44
|
The following chart displays the comparison and classification of cable gland spanner sizes in PG/metric. (For SKINTOP® ST / SKINTOP® ST-M)
Note: For more details, refer to Lapp Kabel Catalogue 2006.
>>SKINTOP® MS
 SKINTOP® MS - universal brass glands
SKINTOP® MS is suitable for the manufacture of machinery and equipment, measuring and controlling in chemical technology, medico-technical equipment and other fields that require exceptional stability and safety. To prevent against distortion, the gland comes with a permanent locked plastic clamp.
SKINTOP® MS- with long thread
SKINTOP® MS with long thread is available from PG 7 to PG 21 with 12mm and PG29 with 15mm thread for thick wall housing.
|
.
PG size |
.
7
|
.
9
|
.
11
|
.
13.5
|
.
16
|
.
21
|
.
29
|
.
36
|
.
42
|
.
48
|
|
.
Clamping
range (mm) |
.
2.5-
6.5
|
.
3.0-
8.0
|
.
4.0-
10
|
.
5.0-
12
|
.
8.0-
14
|
.
11-
18
|
.
16-
25
|
.
19-
32
|
.
28-
38
|
.
34-
44
|
Note: SKINTOP® MS - with long thread range ends at PG29. Clamping range is similar as above.
>>SKINTOP® GMP-GL
 SKINTOP® GMP-GL
SKINTOP® GMP-GL are hexagonal locknuts constructed from polyamide and reinforced glass fibre. The locknuts are used for cable glands without connecting threads. SKINTOP® GMP-GL meets the DIN 46320 standard and the quality and design is a perfect match for SKINTOP® range.
SKINTOP® GMP-GLM
SKINTOP® GMP-GLM are hexagonal locknuts constructed from polyamide and reinforced glass fibre. The locknuts meet the DIN 46319 and the quality and design is a perfect matched for SKINTOP® range.
|
.
PG size |
.
7
|
.
9
|
.
11
|
.
13.5
|
.
16
|
.
21
|
.
29
|
.
36
|
.
42
|
.
48
|
|
.
Clamping
range (mm) |
.
19
|
.
22
|
.
24
|
.
27
|
.
30
|
.
36
|
.
46
|
.
60
|
.
65
|
.
70
|
>>SKINDICHT® Reductions
 -Accessories and separate gland parts.
-Blanking plugs of brass with PG and metric thread.
SKINDICHT® KU, KUS and KUK Reductions
The SKINDICHT® Reductions KU and KUK versions comes with hexagonal heads. The KUK has a knurled ring and can be easily mounted by hand.
|
.
Part number |
.
Sizes |
|
.
The SKINDICHT® KU
5173 0010 to 5202 5070 |
.
KU 11/7 to KU 48/42 |
|
.
The SKINDICHT® KUS
5202 5040 to 5173 0080 |
.
KUS 9/7 to KUS 16/13.5 |
|
.
The SKINDICHT® KUK
5173 0020 to 5173 0110 |
.
KUK 13.5/9 to KUK 36/29 |
>>SKINTOP® MS-SC
 The SKINTOP® MS-SC screen connection is the ideal gland for all copper-screened cables. The widely variable clamping ranges are easy to mount, EMC safe and enables economic storage.
Here are some easy steps to cable connection:
Assembly instructions for standard contacting
- Strip back the outer sheath and screen.
- Cut the outer sheath approximately 15mm
in diameter but do not remove the sheath.
- Guide the cable through the cable gland.
- Pull off the outer sheath.
- Pull back the cable until the connection is made
between the cable screen and contact spring.
- Tighten it and it is ready for use.
Assembly instructions for thin wires without an inner sheath
- Strip back the outer sheath.
- Pull back the screen braid approximately 15 - 20mm
over the outer sheath.
- Insert the cable into the cable gland until the contact
is made between the cable screen and contact spring.
- Tighten it and it is ready for use.
Routing the cable screen to another connection
- Expose the screen braid approximately 10mm.
- Guide the cable through the cable gland until the
connection is made between the cable screen and
contact spring.
- Tighten it and it is ready for use.
|
.
PG size |
.
9
|
.
11
|
.
13.5
|
.
16
|
.
21
|
.
29
|
.
36
|
|
.
Clamping
range (mm) |
.
4.0-
7.5
|
.
4.0-
10
|
.
5.0-
12
|
.
8.0-
14
|
.
11-
17.5
|
.
16-
25
|
.
19-
32
|
>>SKINDICHT® SVF
 This SKINDICHT® SVF made from brass is designed for flat cable. The hexagonal flat cable gland consists of an upper and lower section with special sealing insert and two compression washers. The special feature is the design of the sealing lips that fit automatically around various cable dimensions for each PG-size and flat cable of different outer dimensions. Suitable matching enables cable sealing of two flat cable of different outer dimensions or two flat cable with one gland. The SKINDICHT® SVF is also the robust alternative to the SVFK version.
Assembly tip: Assembly is made easier if the special seal is slightly bent when pushed onto the cable.
|
.
PG size |
.
16
|
.
21
|
.
29
|
.
36
|
.
42
|
.
48
|
|
.
Flat cable width |
.
15.0
|
.
9.0-
12.0
|
.
14.0-
30.0
|
.
24.0-
40.0
|
.
29.0-
45.0
|
.
34.0-
50.0
|
|
Cable thickness
|
5.0
|
3.0-
8.0
|
4.0
-11.5
|
4.0-
11.5
|
5.0-
12.0
|
5.0-
12.0
|
>>SKINDICHT® RWV
 The SKINDICHT® RWV is a compact 90° elbow angle gland. The locknut enables the angle gland to be secured in any position. The material is resistant to seawater, tropical conditions and corrosion when used in combination with grey cast iron or steel. The protection class for the standard design is IP 55 and could vary depending on the special gland combinations.
For glands without incised seal and compression screw, SKINDICHT®RWV is available with O-ring and locknut.
|
.
PG size |
.
7
|
.
9
|
.
11
|
.
13.5
|
.
16
|
.
21
|
.
29
|
|
.
Wrench size (mm) |
.
15/13
|
.
18/15
|
.
21/18
|
.
23/20
|
.
26/22
|
.
32/28
|
.
41/37
|
>>SKINDICHT® KW
 The SKINDICHT® KW is a 90° elbow angle gland made from plastic. The plastic gland secured by a locknut is used for cable parallel installations along the housing wall. SKINDICHT® KW series can be combined with any cable gland, in particular with SKINTOP® ST.
Part Number : 5310 1000 to 5310 1050
Sizes : KW9 to KW29
Intermediate range is also available. |
|
|
|